Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
EN_N is an active low input, therefore you need to use either way a GPIO with a LOW state or a pull-down resistor. to disable the device it is enough to leave the input floating or connecting to a pull-up resistor.
