USB webcam design component suggestion required

arun kumar kadari

Hi Team,

I want to design a USB 2.0 webcam. Could you please suggest me the parts that are required for this design. I searched on your website but couldn't find any specific components or reference designs for this. Also do you have any CMOS sensors for capturing the images? If this isn't the right forum please feel free to move this to the appropriate forum.

My requirements:

resolution: 2-5 Mega pixel

angle of view: 120 degrees

USB 2.0 output

Max operating voltage: 5V

Thanks,

Arun

over 8 years ago

0 Carlos Silva85 over 8 years ago

TI__Expert 4915 points

Hi Kumar. I've notified the group that deals with this matter. They should hopefully get back to you after the weekend.

0 arun kumar kadari over 8 years ago in reply to Carlos Silva85

Intellectual 350 points

Hi Carlos, I haven't received any message from the team. Could you please check with them

0 Moises Garcia over 8 years ago in reply to arun kumar kadari

TI__Mastermind 23815 points

Hi Arun,

We don't have devices for this whole application.
First, you need an image sensor, our team doesn't have it.
There is SN65LVDS324 which is used with HD sensors.
Then you would need a video processor that could take the video and send it through USB, we don't have this.
We do have USB redriver, this devices doesn't deal with protocol information, they just retransmit the signals.

Regards

Interface

Interface forum

USB webcam design component suggestion required