SN65DSI83: We have the devie SN65DSI83 can change mipi to LVDS, do we have device can change LVDS to mipi?

Frank Xiao

Genius 12055 points

Part Number: SN65DSI83
Other Parts Discussed in Thread: DS90CF386, DS90UR910-Q1, DS90UR905Q-Q1

Hi team,

We have the devie SN65DSI83 can change mipi to LVDS, do we have device can change LVDS to mipi?

Thanks.

Frank

over 8 years ago

0 Joel Jimenez0 over 8 years ago

TI__Mastermind 18655 points

Hello Frank,

Are you planning to use MIPI DSI or CSI?

We only have the following solution to convert LVDS to CSI-2. At this point, we do not have any device that outputs DSI data.

For FPD LVDS to RGB data, use an FPD LVDS receiver like the DS90CF386. Other FPD LVDS Receivers here http://www.ti.com/lsds/ti/interface/flatlink-fpd-link-lvds-for-lcd-products.page might work too depending upon the bit resolution and data rate needed. Follow the DS90CF386 with DS90UR905Q-Q1 => DS90UR910-Q1 (see the DS90UR910-Q1 data sheet, pg. 1).

Total possible solution: DS90CF386 => DS90UR905Q-Q1 => DS90UR910-Q1

Regards

0 Frank Xiao over 8 years ago in reply to Joel Jimenez0

TI__Genius 12055 points

Hi Joel,

CSI-2 is ok. The mipi speed is 480MHz or 600MHz. Thanks.

Frank

Interface

Interface forum

SN65DSI83: We have the devie SN65DSI83 can change mipi to LVDS, do we have device can change LVDS to mipi?