TPS65986: BMC-PROT-GSC-REC Fail

KUNVICHET LEE75

Prodigy 240 points

Part Number: TPS65986

I am getting one failure below. Is there a fix for this?

TDA.2.2.9

BMC-PROT-GSC-REC

FAIL

PT_3_12_12_BMC_PROT_GSC_REC_Get_SrcCap

>> No Hard reset message received from DUT or incomplete message capture,

Verify the protocol capture and confirm the failure

FAIL

Thanks,

Vichet

over 8 years ago

0 Eric Beljaars over 8 years ago

TI__Mastermind 36756 points

Hi Kunvichet,

Can you attach the full report and a capture of the failing case?

Thank you,
Eric

0 KUNVICHET LEE75 over 8 years ago in reply to Eric Beljaars

Prodigy 240 points

DK_SC071717_PHY_PROT_GRL_USB_PD_Report_8_15_2017 5_52_45 PM.pdf

Please see attached is the full report.

Thanks,

Vichet

0 Eric Beljaars over 8 years ago in reply to KUNVICHET LEE75

TI__Mastermind 36756 points

Hi Kunvichet,

What version of FW are you using on the TPS65986?
Can you provide your .PJT file?

Thank you,
Eric

0 KUNVICHET LEE75 over 8 years ago in reply to Eric Beljaars

Prodigy 240 points

TPS6598x Application Customization Tool version 2.15

thanks,

Vichet

170719 - 5PDOs.pjt

0 Eric Beljaars over 8 years ago in reply to KUNVICHET LEE75

TI__Mastermind 36756 points

Hi Kunvichet,

The latest version of the tool is Version 3.08. Could you download the latest version of the tool from ti.com and retry the test?
You can download the tool from here: www.ti.com/.../tps6598x-config
We have had many fixes since version 2.15 and I want to confirm you are not seeing an issue that has already been fixed.

Thank you,
Eric

0 KUNVICHET LEE75 over 7 years ago in reply to Eric Beljaars

Prodigy 240 points

Hi Eric,

It seems the new firmware fixed something but also introduced something else. Below is the test result. The column "Results on Old Hardware" had the old Firmware and the "Results on New Hardware" column was programmed using the latest firmware per your suggestion.

Test Area		Results on Old Hardware	Results on New Hardware	Comments
USB PD	Communications Engine	FAIL (GSC- REC test Failed)	FAIL (Get Caps Test Failed)	GetCaps test failing on the current hardware. GetCaps still passes on the old hardware which has the old TI firmware.
	Deterministic Engine	PASS	FAIL (PD.VNDI.E5. Source Capability test failed)	PD.VNDI.E5. Source Capability test failing on the current hardware, but passes on the previous Hardware. This could also be because of new updated TI firmware issue
	Type C Functional	PASS	PASS
	PET	N/A	PASS
	Quadramax	PASS	PASS
	Interop	N/A	PASS

Thank you,

Vichet

0 Eric Beljaars over 7 years ago in reply to KUNVICHET LEE75

TI__Mastermind 36756 points

Hi Vichet,

Can you explain the changes in hardware between the Old hardware and the New hardware. Can you also confirm that the configurations are the same on both boards with only the FW low region being different?

Thank you,
Eric

Interface

Interface forum

TPS65986: BMC-PROT-GSC-REC Fail