SN65MLVD206: IBIS model

David Zhao

Part Number: SN65MLVD206

My customer is using SN65MLVD206 IBIS model. For the REC/DRVR_BI model, gnd_clamp doesn't go through zero point as below shows. What is the reason? Thanks!

Regards

David

over 8 years ago

0 Ryan Hashimoto over 8 years ago

TI__Intellectual 1635 points

Hi David,

I have sent this question to the IBIS modeling team. I will let you know their response as soon I hear back from them.

Regards,
Ryan

0 David Zhao over 8 years ago in reply to Ryan Hashimoto

TI__Intellectual 1820 points

Hi Ryan

Any update about this IBIS case? Customer is pushing for feedback. Thanks!

Regards

David

0 Ryan Hashimoto over 8 years ago in reply to David Zhao

TI__Intellectual 1635 points

Hi David,

My team has tested this device in the lab, and the bench results match the IBIS model. Unfortunately, I do not have access to the design schematic to provide details regarding the reason. Please know that the performance matches the IBIS model, so it can be used for simulation purposes.

Regards,
Ryan

Interface

Interface forum

SN65MLVD206: IBIS model