SN65HVDA100-Q1: connection to LIN2.0 master

Ryuji

Guru 20090 points

Hello,

The SN65HVDA100-Q1 is LIN2.1 compliant device.
Are there any concern when the device is connected to LIN2.0 master?
I think that there is no problem but I would like to confirm it.
I appreciate it if you help this thread.

Best Regards,
Ryuji

over 8 years ago

0 Miguel Robertson over 8 years ago

TI__Guru 62920 points

Hello Ryuji-san,

You are correct that there is no problem using SN65HVDA100-Q1 with a LIN2.0 master. The LIN2.0 and LIN2.1 specifications use the same physical layer, so a transceiver device that is compliant to one of these standards will be compliant to the other one as well.

Best regards,
Max

0 Ryuji over 8 years ago in reply to Miguel Robertson

Guru 20090 points

Hello Max-san,

I appreciate your help.
I understood.

Best Regards,
Ryuji

Interface

Interface forum

SN65HVDA100-Q1: connection to LIN2.0 master