Does TI have a solution(ref design) to convert UHD-SDI to CSI.

Rajesh Kumar68

Prodigy 50 points

over 8 years ago

0 Michael Lu (Santa Clara) over 8 years ago

TI__Mastermind 29655 points

Hi Rajesh,

Unfortunately, we do not have an IC solution that performs this. UHD-SDI conversion to other interface outputs are typically implemented through FPGA or ASIC such as Xilinx Ultrascale or Intel Arria 10.

However, we do have signal conditioning products such as Cable EQ devices that can improve the signal integrity of the SDI signal before entering the FPGA.

Regards,

Michael

0 Rajesh Kumar68 over 8 years ago in reply to Michael Lu (Santa Clara)

Prodigy 50 points

Hi Michael,

Thanks for your reply .
As xilinx required number of other component which will increase my BOM cost.

Does TI has any solution with lower resolution data?

Thanks
Rajesh

0 Michael Lu (Santa Clara) over 8 years ago in reply to Rajesh Kumar68

TI__Mastermind 29655 points

Hi Rajesh,

Unfortunately, no. All possible solutions involving conversion from SDI to CSI would involve interfacing with an FPGA in the middle.

Regards,

Michael

0 Rajesh Kumar68 over 8 years ago in reply to Rajesh Kumar68

Prodigy 50 points

Thanks Micheal for quick resolution.

Interface

Interface forum

Does TI have a solution(ref design) to convert UHD-SDI to CSI.