UCC5320: Using UCC5320S as high side driver

takahiko yokota

Mastermind 7135 points

Part Number: UCC5320

Let me ask you about UCC5320S.

If I use UCC5320S as high side driver, could I use this device as attached document?

UCC5320S.pdf

Best regrds,

Yokota

over 7 years ago

0 Mateo Begue over 7 years ago

TI__Intellectual 2805 points

Hello Yokota,

Yes you can use the UCC5320S as a high-side driver as you described.
I added a note to the diagram reminding the customer to ensure that VCC2 is in the recommended operating range in reference to VEE2.
This is due to the switch node's changing potential.

regards,
Mateo

6787.UCC5320S.pdf

0 Don Dapkus over 7 years ago in reply to Mateo Begue

TI__Guru**** 189401 points

Hi Yokota-san,

Did this answer your question? If so, please mark this thread as verified for us.

You might find this TI Design helpful: www.ti.com/.../TIDA-01160

If you have further questions, please let us know!

Interface

Interface forum

UCC5320: Using UCC5320S as high side driver