TUSB3410: Does any TUSB3410 compliance test setup when perform in upstream port?

Peter Chen(ICP_FAE)

Intellectual 2480 points

Part Number: TUSB3410

Does any TUSB3410 compliance test setup when perform in upstream port?

over 8 years ago

0 Jorge Llamas (SWAT) over 8 years ago

TI__Expert 7395 points

Hello Peter,
I am not sure to understand the question here. Can you please elaborate on what's required?
Thanks,
Jorge

0 Peter Chen(ICP_FAE) over 8 years ago in reply to Jorge Llamas (SWAT)

TI__Intellectual 2480 points

Jorge
customer would like to perform USB compliance eye diagram on TUSB3410 like section 6 of datasheet show.

0 JMMN over 8 years ago in reply to Peter Chen(ICP_FAE)

TI__Guru 60870 points

Hi Peter,

The customer will need to use the EHCI HSETT tool or the XHCI HSETT tool from the USB-IF (usb.org) to force the TUSB3410 to send test packets. They will also need a USB 2.0 signal quality test board that support upstream signal quality testing to see the eye diagram properly.

Regards,
JMMN

Interface

Interface forum

TUSB3410: Does any TUSB3410 compliance test setup when perform in upstream port?