Hello,
Posting on behalf of my customer.
I'm doing a board interconnect layout and ran into an apparent error - On J8 (TX header), there appears to be
an error in the labeling on the schematic - page 10.
It shows for J8:
TXD0_H (pin 23) and TXD1_H (pin 25)
I believe it should be:
TXD1_H (pin 23) and TXD0_H (pin 25)
The RXD* signals on J9 are all sequential...
Can you have someone confirm this for me?
Thank you,
Keith N.
AFA OH/wPA
