• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 530 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH0387: LMH0387, dual output variant

Carlos Silva85
Expert 4915 points
Part Number: LMH0387
Other Parts Discussed in Thread: LMH0397

I have a requirement to drive two SDI signals from a single input signal, do we have a dual output (75Ω) version of the LMH0387?

  • 0
    TI__Mastermind 29655 points
    Hi Carlos,

    There is a next-generation 3G-SDI bidirectional I/O that serves this purpose. It is not pin-compatible, but does feature the ability to drive two 75-ohm outputs from a single 100-ohm differential output.

    Please take a look at the LMH0397. When set up in CD Mode, it acts as a dual cable driver with integrated reclocker. Note that you will need to request access in the product folder page to view the full datasheet.

    Michael