• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 2165 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

FPC401: How to reset SFP+ /QSFP*

Toshiyuki
Mastermind 7075 points
Part Number: FPC401

Hi,

Our customer is considering FPC401. Then, if the SFP+/QSFP+ is stuck during I2C communications, is there any way to reset the SFP+/QSFP+?

Best Regards,

Toshiyuki

  • 0
    TI__Intellectual 1985 points

    Hi Toshiyuki-san,

    The FPC401 can send an I2C reset sequence to the SFP/QSFP port. This is accomplished by setting the P<#>_RST_SEQ_EN bit in Register Reg_0x95. Setting this bit to '1' for the appropriate port will initiate the I2C reset sequence, after which this bit will automatically be cleared.