• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 34 subscribers
  • Views 437 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB8041: Hub into test mode?

David Sandler
Intellectual 1910 points

Part Number: TUSB8041

Hi,

I was wondering if you can help with the TUSB8041 part, we need to do physical layer electrical signal quality tests, but there is no information on how to put this hub into test mode.

Can you provide more information ?

Thanks,

David

  • 0
    TI__Guru 60870 points
    David,

    The USB test modes are all defined in the USB specification, so they are common to all USB devices. You should be able to use the tools / documents available on usb.org to place the hub in test mode. If you are having trouble with a specific tool or command, we can help with that.

    Regards,
    JMMN