DS90UB954-Q1: Asking for the DS90UB954 output support

SHH

Hi Team,
Customer has question for the 954. Can 954 output the MIPI-CSI2 format if camera module is DS90UB933(parallel interface 10~12bit)?

marked in reb

Thanks,
SHH

over 8 years ago

0 Steven(Shenzhen) Shi over 8 years ago

TI__Mastermind 30515 points

SHH,
yes, UB954 only can output CSI2. the CSI-2 mode or RAW mode is mapped with serializer, e.g if using UB913a/933, the RAW mode is set. if using UB935/953, the CSI2 mode is selected.

best regards,
Steven

0 SHH over 8 years ago in reply to Steven(Shenzhen) Shi

TI__Mastermind 32566 points

Hi Steven,

Can DS90UB954-Q1 change from 4 lane output to 2 lane output?

Thanks,
SHH

0 SHH over 8 years ago in reply to SHH

TI__Mastermind 32566 points

Hi team,
Could you please help?

Thanks,
SHH

0 Steven(Shenzhen) Shi over 8 years ago in reply to SHH

TI__Mastermind 30515 points

Sure, UB954 can support different lanes number for CSI2 I/F. You can check d/s on the CSI2 register setting. thanks.

best regards,

Steven

Interface

Interface forum

DS90UB954-Q1: Asking for the DS90UB954 output support