• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 34 subscribers
  • Views 577 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB4041I: TUSB4041I, TUSB4020BI / Feature to adjust output signal amplitude

S.Satoshi
Guru 21685 points

Part Number: TUSB4041I

Hi,

Please let me ask about the feature to adjust output signal amplitude. I can't see such feature in datasheet but let me ask just in case if you have.

Best Regards,

Satoshi / Japan Disty

  • 0
    TI__Guru 60870 points
    Hello Satoshi,

    The output signal amplitude can be adjusted by varying the value of the resistor on the USB_R1 pin. A lower value will increase the amplitude of the outputs. The lowest acceptable value is ~8.1K.

    Regards,
    JMMN