• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 400 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB522P: SN65LVPE512 change to TUSB522P (Pin6&18 is connected to GND)

Vincent Chiu
Prodigy 180 points
Part Number: TUSB522P
Other Parts Discussed in Thread: SN65LVPE512,

Hi,

We change TI USB 3.0 re-driver solution from SN65LVPE512 to TUSB522P, however,  pin6&18 is connected to GND without any layout modification.


It works fine with our function test, but will it casue some realibility issue? Pin6&18 is reserved for any engineering test?

Regards,


Vincent