DS90UB954-Q1: screen for 954 EVM

Mike Wang2

Part Number: DS90UB954-Q1

hi team,

my customer is evaluating our fpd-link by camera module based on 913 + 954 EVM. they want to use a screen to see the 954 output image.

did we test our EVM using similar approach? could you let me know what's the screen P/N if we have?

thanks

Mike

over 7 years ago

0 Mike Wang2 over 7 years ago

TI__Intellectual 2760 points

hi team,

any feedback?

0 Steven(Shenzhen) Shi over 7 years ago in reply to Mike Wang2

TI__Mastermind 30515 points

No, Mike.
the MIPI connector pin definition is not standard, we have no such i/f screen vendor.

best regards,
Steven

0 Mike Wang2 over 7 years ago in reply to Steven(Shenzhen) Shi

TI__Intellectual 2760 points

steven,

customer wants to check the 954EVM's output data. what's the recommended approach.

br,

mike

0 Steven(Shenzhen) Shi over 7 years ago in reply to Mike Wang2

TI__Mastermind 30515 points

Mike,
as I know, some sensor vendor developed the test system, such as OV (done), Sony (on-going). You can turn to camera's sensor vendor for help.

best regards,
Steven

Interface

Interface forum

DS90UB954-Q1: screen for 954 EVM