TPS65983B: Datasheet en Config tool 'bugs'

Pieter Postma

Part Number: TPS65983B

Hi,

I asked a time ago some question about daisy chaining the TPS6598x

https://e2e.ti.com/support/interface/usb/f/1008/t/589807

2. Add: SPI_MISO Low has to be low when in secondary mode. Otherwise system will not boot. (now it is only in the flow chart)

over 7 years ago

0 Aramis P. Alvarez over 7 years ago

TI__Genius 10370 points

Hi Pieter,

Thank you for catching datasheet bugs for us. Could you please clarify what is being asked here? I believe you're saying to put "SPI_MISO has to be low when in secondary mode" in the firmware user's guide. Is this correct? Besides the flowchart on the firmware user's guide, I believe we also state this in Table 3-10 in the firmware technical manual: http://www.ti.com/lit/ug/slvuan1a/slvuan1a.pdf

I hope this helps :-)

0 Pieter Postma over 7 years ago in reply to Aramis P. Alvarez

Intellectual 260 points

Hi Armaris,

I think something goes wrong with the forum.
There is two posts of me, don't know why.

e2e.ti.com/.../2355433

Interface

Interface forum

TPS65983B: Datasheet en Config tool 'bugs'