• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 682 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB954-Q1EVM: REV E2, STP connection

Ryuji
Guru 20090 points
Part Number: DS90UB954-Q1EVM
Other Parts Discussed in Thread: DS90UB954-Q1

Hello,

Can we use DS90UB954EVM REV E2 with STP cable?
Now we connected cable to the C67 and C68. Cut the line of C67 and C68.
But 954 didn't detect lock. I changed 
I would like to know the guideline to use STP cable with DS90UB954-Q1. 

Best Regards,
Ryuji

  • 0
    TI__Genius 12705 points

    Please order production version of 954 EVM.  This has option for bringing differential signals to the edge of board by simple rework Remove PoC feed to RIN0+, remove 50 resistor on RIN0- and add 0 ohm series reistor, install Fakra connector at RIN0-.

    Then adapter from Fakra to STP (or Fakra to SMA to STP)  will provide connection to STP.