DS90UB964-Q1: Registers Setting Example

Kenichiro

Part Number: DS90UB964-Q1
Other Parts Discussed in Thread: DS90UB913A-Q1,

[ DS90UB964-Q1 ] Registers Setting Example

Hi,

Can you share the example of registers settings for DS90UB964-Q1 in conjunction with 4 DS90UB913A-Q1?
Specifically, if you have a register dump for that case, it's good reference for my customer.

Sorry, at this moment, I don't have DS90UB964-Q1EVM, so cannot try.

Regards,
Ken

over 6 years ago

0 Davor Glisic over 6 years ago

TI__Expert 7935 points

Hello Ken,

The default register settings can be found in the device datasheets. Typically, no specific register updates are required for the 913A. While the 964 is already configured for receiving data from 4 serializers, some device configuration is typically needed. Section 1.10.10 of the DS90UB064-Q1EVM User's Guide shows an example script. Here is the link to the Guide: www.ti.com/.../snlu177.pdf

Regards,
Davor

0 Kenichiro over 6 years ago in reply to Davor Glisic

Mastermind 9165 points

Hello,

Thank you for your reply!
I will look into user's guide and consult with my customer.

Thanks,
Ken

Happy Thanksgiving!!

Interface

Interface forum

DS90UB964-Q1: Registers Setting Example

[ DS90UB964-Q1 ] Registers Setting Example