TPS65982: PP_XXXconfig bits in System configuration register(0x28)

Takashi Onawa

Genius 13200 points

Part Number: TPS65982

Hi Team,

My customer only use PP_EXT in their application, so they think other path can be set to disable like below.

Is this setting acceptable?

If there is any side effect, please let me know.

Regards,

Takashi Onawa

over 7 years ago

0 Eric Beljaars over 7 years ago

TI__Mastermind 36756 points

Hi Onawa-san,

This would be an acceptable configuration if PP_EXT is the only path that they are using. However, in the source capabilities register, all of the source PDOs must be set to PP_EXT in this configuration.

Thank you,
Eric

0 Takashi Onawa over 7 years ago in reply to Eric Beljaars

TI__Genius 13200 points

Hi Eric-san,

Thanks. I understood.

Regards,
Takashi Onawa

Interface

Interface forum

TPS65982: PP_XXXconfig bits in System configuration register(0x28)