TPS65986: MQP compliance test

Luke Hsieh

Part Number: TPS65986

Hi ,

I am using TPS65986 as a PD controller at UFP and DFP.

After we doing MQP compliance test, there have some fault items on MQP report.

Fault items show as below:

BMC-PHY-RX-BUSIDL

BMC-PHY-RX-INT-REJ

BMC-PHY-MSG

And I had reference to our USB Power Delivery - Compliance Tests document.

But it doesn't mention the MQP test.

How do modify the TPS65986 setting to fix those fault items?

Thanks.

0 Eric Beljaars over 8 years ago

Hi Luke,

Thank you for your question. Can you provide me some more details on the failed items?

Thank you,
Eric

0 Yu-Ning Lee over 8 years ago in reply to Eric Beljaars

Please also provide MQP test report, failure log, VIF and project file you are using to run this test. Thanks

0 Luke Hsieh over 8 years ago in reply to Yu-Ning Lee

Hi Yoon and Eric,

Thanks for your help.

Here are the fault items. And I had sending other detail content by mail.

BMC Bus Idle Detection Test

BMC-PHY-RX-BUSIDL

BMC Receive Interference Rejection Test

BMC-PHY-RX-INT-REJ

BMC PHY Level Message Test

Thanks.

0 Eric Beljaars over 8 years ago in reply to Luke Hsieh

Hi Luke,

I will go ahead and close this thread. We will reply to you via mail.

Thank you,
Eric

Interface forum