DS125DF111: Bin file

Hi AJ,

Please download the Sigcon Architect from ti.com.  Also download the DS125DF111 profile.

Using the Sigcon Architect in "Demo Mode" it is possible to create the EEPROM file.  You will need a separate tool to perform the EEPROM write.

Here is a link to the EEPROM creation process using the DS80PCI800.  The process would be the same for the DS125DF111.

Regards,

Lee

Hello ,

one more question as below,please help to check it. TKS!!

The DS125DF111 device that has two operation mode( SMBus Mode and Pin control Mode).

Can I use the TI DS125DF111 on 10G SFP+ signal under Pin control Mode?

Regards,

Arthur.

Hi Lee,

Thanks for your reply!

Regards,

Arthur.

Hi Lee,

We create a  EEPROM file (using DS125DF111) for SFP+ application as attachment.

Currently,Our 10G interface still can't work (no link up).

Could you please help to re-view this EEPROM file?

Regards,

Arthur.

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/138/DS125DF111_5F00_SFP_5F00_v02.7z

Hi Arthur,

I would change the following

Channel Register

0x2D = 82

0x2F = 66

0x41 = 40

0x64 = FF

It looks like you want 1.25 Gbps or 12.288 Gbps.  Please confirm.

Regards,

Lee