TPS2553D: I think that the simplified schematic on page 1 of the device datasheet is not correct about Power Pad.

Kazuya Nakai59

Guru 20670 points

Part Number: TPS2553D
Other Parts Discussed in Thread: TPS2552D, TPS2552, TPS2553

Hello guys,

One of our customers found one wrong point in TPS2552D/2553D datashet. It is simplified schematic on page1 of the device datasheet. The simplified schematic says the power pad of the device package is connected to GND. But the device package type is SOT-23(DBV) only and DBV doesn't have Power pad. We think it is forgotton to erace when TPS2552D/53D datasheet is made from TPS255X datasheet.

Could you please modify the wrong point when you update TPS2552D/53D datasheet?

Best regards,

Kazuya Nakai.

over 6 years ago

0 Michael Tan over 6 years ago

TI__Expert 8420 points

Hi Nakai,
Thanks for checking our datasheet , could you help to point out which page it is in the tps2552 datasheet?

0 Kazuya Nakai59 over 6 years ago in reply to Michael Tan

Guru 20670 points

Hi Michael,

TPS2552 datasheet is no problem. The problem is on page1 on TPS2552D/53D datasheet. I think SOT23 doesn't have power pad.
www.ti.com/.../slvsdl7.pdf

Thank you and best regards,
Kazuya Nakai.

0 Michael Tan over 6 years ago in reply to Kazuya Nakai59

TI__Expert 8420 points

Hi Nakai,

We have check the tps2553 datasheet , I think your confuse is about the page 4 " pin function" . At the bottom of this table , we use "-" mean don't have power pad for these two part .

Interface

Interface forum

TPS2553D: I think that the simplified schematic on page 1 of the device datasheet is not correct about Power Pad.