DS25CP104A: IBIS-AMI model for DS25CP104A Crosspoint Switch

Wouter Stapper

Prodigy 90 points

Part Number: DS25CP104A

For this DS25CP104A Crosspoint Switch there is an IBIS model on the tools&software page.

This normal IBIS model lacks the possibility to play with the Tx Pre-Emphasis & Rx Equalization.

This is something I need for my simulation. And this is possible with an IBIS-AMI model.

Can TI supply the IBIS-AMI model for the DS25CP104A Crosspoint Switch

over 8 years ago

0 Michael Lu (Santa Clara) over 8 years ago

TI__Mastermind 29655 points

Hi Wouter,

Yes, we do have an IBIS-AMI model for this device, but this requires us to create an NDA in order to share this with you. Do you have a local TI contact with whom you work with? If so, we can complete the NDA so that we can share this model with you.

Regards,

Michael

0 Wouter Stapper over 8 years ago in reply to Michael Lu (Santa Clara)

Prodigy 90 points

Hi Michael,

I'm not sure we still have a valid NDA. I've worked with TI Confidential (NDA restricted) IBIS-AMI model before but that was in 2016.
I'll try to get the customer to supply me with info (or even the model).

BR Wouter

0 Michael Lu (Santa Clara) over 8 years ago in reply to Wouter Stapper

TI__Mastermind 29655 points

Hi Wouter,

Thanks. Let's take this discussion offline through e-mail to check on the status of the NDA.

Regards,

Michael

Interface

Interface forum

DS25CP104A: IBIS-AMI model for DS25CP104A Crosspoint Switch