TPS65983B: Check OCP and OVP behavior

Ray Chang

Intellectual 1345 points

Part Number: TPS65983B

Hi, Team

Could you let me know what is the OVP/OCP behavior in TPS65983B?

If the VBUS exceed OVP trip point, will it latch off or re-try?

If the TPS65983B used the external MOSFET and exceed OCP trip point, will it limit the current or latch off?

over 7 years ago

0 Eric Beljaars over 7 years ago

TI__Mastermind 36751 points

Hi Ray,

If the VBUS exceeds the OVP trip point, it will keep retrying until the voltage is below the OVP trip point.
The same behavior is completed for the external FET when it surpasses the OCP trip point.

Thank you,
Eric

0 Ray Chang over 7 years ago in reply to Eric Beljaars

TI__Intellectual 1345 points

Hi, Eric

If the VBUS exceed the OVP trip point and it keep retrying.
Will it clamp the VBUS voltage?

For the external FET, will it limit the output current?

0 Eric Beljaars over 7 years ago in reply to Ray Chang

TI__Mastermind 36751 points

Hi Ray,

The TPS65983B will not clamp the VBUS voltage in an OVP condition.
The TPS65983B will try to limit the current output on the external power path to the negotiated sourcing amount.

Thank you,
Eric

Interface

Interface forum

TPS65983B: Check OCP and OVP behavior