• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 33 subscribers
  • Views 549 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDP158: SSC support

Lilian Chang
Intellectual 1555 points

Part Number: TDP158

Hi Team,

If TDP158 input signal is SSC(spectrum spread), can it work with that? The output is also SSC?

Thanks.

  • 0
    TI__Expert 5455 points
    Hello Lilian

    The device can receive this kind of signals but the output is TMDS.

    Regards
    Francisco
  • 0 in reply to Francisco Javier Zamudio
    TI__Intellectual 1555 points
    Hi Francisco,

    Could you please explain what's TMDS stands for? So the output signal is not SSC, and output signal frequency is fixed?
  • 0 in reply to Lilian Chang
    TI__Expert 5455 points
    Hello Lilian

    The TMDS (Transition-minimized differential signaling) technology uses the current drive to develop the low voltage differential signal at the sink side of the DC coupled transmission line. The TMDS is current mode logic and terminated to 3.3V the DC coupling is part of the specification.
    In your first question, I understood that you want to use AC-coupled TMDS or DP++ signals with the spread-spectrum applied to the input signal (that this will be really hard to the sink to understand the data on the message, this technique is mainly focused only in clocks).
    The redriver's output will be affected by the elements that you configure (like equalization, slew rate, pre-emphasis, etc.) and the spectrum will be affected, basically, you will have a filter where the main signal will through the device with a gain and other factors that you configure.

    Regards
    Francisco