TPS65982: To enable USB Suspend supported bit(0x32 bit52)

Takashi Onawa

Part Number: TPS65982

Hi Team,

Can you give them any advice on points to be aware of when activating this bit?
Please share if you have something like a checklist for activating USB Suspend supported bit (0x32 bit52).

Regards,

Takashi Onawa

over 8 years ago

0 Jacob Ontiveros over 8 years ago

TI__Expert 6280 points

Hi Onawa-san,

You can refer to the Vendor Info File generator documentation that shows when this specific bit is set. Check page 25/28.

www.usb.org/.../VendorInfoFileGeneratorRelease_1.2.0.2.zip

0 Takashi Onawa over 8 years ago in reply to Jacob Ontiveros

TI__Genius 13200 points

Hi Jacob-san,

Thanks for your good suggestion! I almost forgot that Document.
I will ask them to refer the document.

Regards,
Takashi Onawa

Interface

Interface forum

TPS65982: To enable USB Suspend supported bit(0x32 bit52)