• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 414 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB929-Q1: Keep register values of (de)serializer

Sebastian Manz
Intellectual 470 points
Part Number: DS90UB929-Q1
Other Parts Discussed in Thread: DS90UB928Q-Q1

Hello,

I have a ds90ub929-q1 connected with ds90ub928q-q1 and Analog LaunchPad tool started. Is there a way to save the register values made in the 'registers' and 'remote registers' tabs of Analog LaunchPad? After powering each device off and on again they go back to the default values. Is the user supposed to set the values anew every time the devices get powered on? I'm not looking at the register bits which are accessible through strappings. 

Thanks,

Sebastian