• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 913 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPD4EUSB30: D+ D- Swap

SimonF
Expert 3420 points

Part Number: TPD4EUSB30

Hi Team,

can there be any problem with TPD4EUSB30 if you swap the D+ D- signals? Any specific reason why D+ and D- are specifically marked in the datasheet?

Thank you for your time!

Best regards,

Simon

  • 0
    TI__Expert 3500 points
    Simon-

    The D+/D- signals are specifically marked in the datasheet because for ease of routing it is generally better to use them that way, but the inputs are identical and can be swapped if it is easier for layout in your situation. Feel free to follow up if you have any additional questions!

    Thanks,
    Alec