• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 35 subscribers
  • Views 1126 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90C387A: Interface of TFP403 with DS90C387A

Shaziya Kurolikar
Prodigy 50 points

Part Number: DS90C387A
Other Parts Discussed in Thread: TFP403

Hi,

We are developing HDMI interface with LVDS display . For that we are using TFP403 and DS90C387A.

So can any one help us how to interface the TFP403 wtih DS90C387A In single channel mode.

  • 0
    TI__Genius 10475 points
    Hello,
    Is your question on the TFP403 receiver side or the C387A transmit side? Have you looked at the product documentation online? The C387A datasheet provides information on how to configure for both single pixel and dual pixel modes.
  • 0 in reply to Palaniappan Manickam
    Prodigy 50 points

    Hi,

    We are using DS90C387A at transmit side.

    We are refer the following two application notes. It makes confusion.

    1. SLLA325A

    2. SNLA014

    So Please suggest the single channel LVDS connection for DS90C387A at transmit side.

  • 0 in reply to Shaziya Kurolikar
    TI__Mastermind 30515 points
    Hi, can you list what your confusion for this application?
    for 387A, please see d/s for single pixel application as below. this is one Serializer, the parallel inputs are serialized in the LVDS output.

    Dual Pin: Three-mode select for dual pixel, single pixel, or single pixel input to dual
    pixel output operation. Single pixel mode when input is low (only LVDS
    channels A0 thru A3 and CLK1 are active) for power savings. Dual mode is
    active when input is high. Single in - dual out when input is at 1/2 Vcc. (Note
    10)

    best regards,
    Steven