• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 432 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Linux: DS90UB940-Q1 drive

Meng jeffrey
Expert 2760 points
Other Parts Discussed in Thread: DS90UB940-Q1

Tool/software: Linux

I want to use the DS90UB940-Q1, Mipi interface, and get the driver of the Linux on I.MX6.

  • 0
    TI__Mastermind 30515 points
    Jeffrey,
    UB940 can work in most cases without register setting. but as you know, UB940 also can be programmed based on system design guide.
    you can check the register of UB940 in d/s according to your system usecase and configure it through i.MX6's I2C driver. thanks.

    best regards,
    Steven