• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 375 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB1210: If tusb1210 could be both host and device under UART mode

Sammi Shang
Expert 4450 points

Part Number: TUSB1210

Dear team, 

If tusb1210 could be as host or as device under UART mode? I could see it could be both under ULPI mode.

Thanks.

Best regards,

Sammi

  • 0
    TI__Guru 60870 points
    Hi Sammi,

    In UART mode, the TUSB1210 is sending UART signals across the USB signal lines, so it isn't a USB host or device. You can check the ULPI specification for more information on UART mode of a ULPI transceiver.

    Regards,
    JMMN