• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 687 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65HVD33: half-duplex mode of SN65HVD33

Lilian Chang
Intellectual 1555 points

Part Number: SN65HVD33

Hi Team,

If the SN65HVD33 can work at half duplex mode， which means only use one pair differential cable?   

if Yes, could you please help to design suggestion of how RS422 full duplex switch to RS485 half duplex work mode?  

Thank you.

  • 0
    TI__Guru 62920 points
    Hi Lilian,

    A full-duplex transceiver can operate as a half-duplex transceiver when the differential output lines are tied to the differential input lines. The non-inverting output (Y) should be tied to the non-inverting input (A) and the inverting output (Z) should be tied to the inverting input (B). This connection could be a fixed configuration on a PCB or could be configurable via jumpers/switches or by logic-controllable devices like solid-state relays.

    Regards,
    Max