DS90UB964-Q1: Detail Description of Indirect Registers

Kenichiro

Part Number: DS90UB964-Q1

[ DS90UB964-Q1 ] Detail Description of Indirect Registers

Hi,

Can you share the detail descriptions of indirect registers?

My customer would like to use channel monitor loop-through output and, yes, there is a bit of information of script in the datasheet.
It's appreciated if you can share the details of these registers.

Thanks,
Ken

over 7 years ago

0 Palaniappan Manickam over 7 years ago

TI__Genius 10475 points

Hello,
For selecting CMLOUT they should just follow the instructions/settings in the datasheet. There is a code example and table provided in the datasheet section 8.4.6.
We will not be able to provide additional information about the reserved registers beyond what is shown in the datasheet.

0 Kenichiro over 7 years ago in reply to Palaniappan Manickam

Mastermind 9165 points

Hi Palaniappan,

Okay, I see. Then, let me confirm quick one.
Correct?

<Loop-Through Driver>:

0xB2 = 1xxxxxxx : Enable Loop-Through Output Driver
0xB2 = 0xxxxxxx : Disable Loop-Through Output Driver

<CML Output Driver>:

0xB2 = xxxxxx1x : Enable CML Data Output
0xB2 = xxxxxx0x : Disable CML Data Output

Thanks,
Ken

0 Palaniappan Manickam over 7 years ago in reply to Kenichiro

TI__Genius 10475 points

Ken,
To enable the CMLOUT just following the settings in the datasheet is sufficient, bit by bit understanding of the registers is not needed.

0 Kenichiro over 7 years ago in reply to Palaniappan Manickam

Mastermind 9165 points

Ummm, okay.

Interface

Interface forum

DS90UB964-Q1: Detail Description of Indirect Registers

[ DS90UB964-Q1 ] Detail Description of Indirect Registers