DS90C385A: Check schematic with DS90C385A

Sulyn ZHANG

Part Number: DS90C385A

Hi Team,

We are penetrating our AM570x + DS90C385A in the new project, would you help double check the schematic for customer, thanks!

AM5708 _ P18-VEDIO_DS90C385A.pdf

Best regards,

Sulyn

over 7 years ago

0 Ikechukwu Anyiam over 7 years ago

TI__Mastermind 35130 points

Hi Sulyn,

I will review the schematic and get back to you early next week.

Regards,
I.K.

0 Sulyn ZHANG over 7 years ago in reply to Ikechukwu Anyiam

TI__Expert 8700 points

Hi Anyiam,
Thanks for the support!

0 Ikechukwu Anyiam over 7 years ago in reply to Sulyn ZHANG

TI__Mastermind 35130 points

Hi Sulyn,

I apologize for the delay. I've reviewed the schematic and most everything looks okay, but I am a little confused on how they have mapped the RGB data. Did they reference this application note during the design? www.ti.com/.../snla014.pdf

Regards,
I.K.

0 Sulyn ZHANG over 7 years ago in reply to Ikechukwu Anyiam

TI__Expert 8700 points

Hi Anyiam,

Thanks for the support! Sorry they didn't find this application note, so I want to confirm with you, they need to follow below pin map as showed in this user guider, correct? Thanks a lot!

Best regards,

Sulyn

0 Ikechukwu Anyiam over 7 years ago in reply to Sulyn ZHANG

TI__Mastermind 35130 points

Hi Sulyn,

Yes, for 24 bits that is the correct mapping they should use if their application is 24-bit and single pixel per clock.

Regards,
I.K.

Interface

Interface forum

DS90C385A: Check schematic with DS90C385A