SN65DSI83: DSI to LVDS resolution config

Vickers

Part Number: SN65DSI83

Hello，

I want to convert DSI to LVDS with SN65DSI83.I have many screens with different sizes.How to quickly config registers for matching?What registers need to be config?I am debugging 1024x600.Display color is too white.

Vickers.

over 7 years ago

0 Ikechukwu Anyiam over 7 years ago

TI__Mastermind 35130 points

Hi,

Please use the DSI Tuner to configure the registers: www.ti.com/.../DSI-TUNER

Regards,
I.K.

0 Vickers over 7 years ago in reply to Ikechukwu Anyiam

Intellectual 980 points

Hi I.K,

My computer DSI Tuner does not show the calculator icon.My computer system is win7.

0 Ikechukwu Anyiam over 7 years ago in reply to Vickers

TI__Mastermind 35130 points

Hello,

Please try the attached version of the tool. The password is "ti".

Regards,

I.K.

DSI Tuner 2.1.zip

0 Vickers over 7 years ago in reply to Ikechukwu Anyiam

Intellectual 980 points

Hi，

Thank you for your answer.It's fine on version 2.1.A new question,what is the difference between the pannel input and dsi input?

LVDS CLK,source,DSI ch A CLK, Divisor these four parameters should be how to fill it?

0 Vickers over 7 years ago in reply to Ikechukwu Anyiam

Intellectual 980 points

Hi I.K.
Does dsi83 support 1024*600 resolution? Trouble confirm the range of support, from the smallest to the largest.
Regards,
Vickers

0 Vickers over 7 years ago in reply to Ikechukwu Anyiam

Intellectual 980 points

Hi I.K.

attached is the LCD data sheet.YT101BNGK1003-A12 SPC.pdf

0 Ikechukwu Anyiam over 7 years ago in reply to Vickers

TI__Mastermind 35130 points

Hello Vickers,

Yes, the dsi83 can support 1024x600 resolution. LVDS CLK is the frequency of your panel, and DSI CHA CLK is the frequency of the DSI clock. The divisor divides the DSI clock by an integer number to derive the LVDS CLK.

Regards,
I.K.

Interface

Interface forum

SN65DSI83: DSI to LVDS resolution config