TVP7002: Video decoder needed for Stanag 3350B

SIDDHARTH MOHAN

Part Number: TVP7002

Hi All, i need advise on video decoder part no. for converting video in Stanag 3350B format , can you please advise.

I believe the voltage swing is from 0 to 1V. Stanag uses the differential analog signal to carry the colour information.

over 8 years ago

0 Cvetolin Shulev-XID over 8 years ago

TI__Guru 65405 points

Hi Mohan,

If you mean STANAG 3350 Class B, 625 Lines, 25 Frames/ Sec, 50 Fields/ Sec, it is very similar to PAL standard. The voltage swing is in range 0 to 1.073V for PAL:

upload.wikimedia.org/.../Composite_Video.svg

Here is a similar discussion:

For more details about STANAG 3350 please contact to local TI representative.

BR
Tsvetolin Shulev

0 SIDDHARTH MOHAN over 8 years ago in reply to Cvetolin Shulev-XID

Genius 3205 points

thanks i have already gone through the link provided by you but all those parts are NRND

0 Cvetolin Shulev-XID over 8 years ago in reply to SIDDHARTH MOHAN

TI__Guru 65405 points

You can search for there parts in third party vendors (For example):
www.digipart.com/.../TVP5160

BR
Tsvetolin Shulev

0 SIDDHARTH MOHAN over 8 years ago in reply to Cvetolin Shulev-XID

Genius 3205 points

thanks for the reply but since these are NRND , it would not be advisable to use them for new designs right ? Don't we have any non-NRND parts ?

Interface

Interface forum

TVP7002: Video decoder needed for Stanag 3350B