• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 505 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90C387A: DS90C387A

Amit Jain54
Prodigy 230 points
Part Number: DS90C387A
Other Parts Discussed in Thread: TFP401A,

HI,

We are Using this chip in one of our design With TFP401A and as TFP401A First pixel is even we connected it all pixels as per it but when i am referringG156HAN02.1_20180130_BSI.pdfSCH.pdf attached datasheet of TFT i am getting confused can you please check this datasheet for us and conform us first pixel is odd or even.

Thanks in advance.

Regards,

Amit JAin

  • 0
    TI__Genius 10475 points
    Hello,
    Is your question about TFP401A or on the DS90C387A side?
    The DS90C387A can be configured for single pixel or dual pixel application (refer to the datasheet page 16). In dual pixel mode, the input signals are split into odd and even pixel starting with the odd pixel outputs first and then even pixel outputs.
  • 0 in reply to Palaniappan Manickam
    Prodigy 230 points

    Hi Manickam,

    My question is regarding TFT Assuming our TFT panel takes odd Pixels first and then second Pixel is even then we need to look at TFP401A datasheet or DS90C387A datasheet because in our application we are using both the chips 3007.G156HAN02.1_20180130_BSI.pdfTFP401A for HDMI to RGB and DS90C387A for Drving attached 2 channel TFT attached is datasheet for same.

    Thanks in advance.

    Regards,

    Amit Jain