Hi all!
We are developing a small lvds driver bridge between our RGB-24 Interface and a new TFT screen which involves LVDS.
We want to know if we are doing the good thing with the pinmappins regarding to TX and output LVDS.
Check our schematics for details (PDF).
In the third sheet, you see at the leftside the Inputs, and on the right Side the output for our LVDS Screen.
We have followed the datasheet regarding to pinmappings and instructions on high/low signals on some pins.
Hope you can provide us some information on if we doing this the right way or not.
Best regards,
K. de Boer | Embedded System Engineer
