SD387EVK: LMH0387

John456

Prodigy 20 points

Part Number: SD387EVK

When executing Analog Launchpad with hardware attached I get "MainGUI.exe has stopped working".

It opens in demo mode if hardware is not attached.

Using ALPF_setup_v_1_57_0010.exe version.

over 7 years ago

0 Nasser Mohammadi over 7 years ago

TI__Guru* 93670 points

Hi John,

ALP software was designed around win xp and it is not compatible with win7 or win10. Can you please try this with win xp?

Also, is this a new design you are working on? LMH0397 is the next generation bi-directional IO with integrated CDR and longer cable reach than LMH0387. It maybe a better option for new design.

Regards,,nasser

0 John456 over 7 years ago in reply to Nasser Mohammadi

Prodigy 20 points

I was able to get it to work using the ALP 1.28.0002 version on win XP. The problem with the 1.57.001 version was that the USB NANO driver didn't seem to be in the distribution. The instructions said to use the cypress drivers, but I couldn't get anything there to work. The 1.28.0002 version had the driver included.

0 Nasser Mohammadi over 7 years ago in reply to John456

TI__Guru* 93670 points

Hi John,
Thanks very much for the update. We can now close this issue.
Regards,,nasser

Interface

Interface forum

SD387EVK: LMH0387