DS90UB954-Q1EVM: DS90UB954-Q1EVM

Eric Cui13

Part Number: DS90UB954-Q1EVM
Other Parts Discussed in Thread: DS90UB953-Q1EVM,

hi,

I purchased TI's DS90UB953-Q1EVM, DS90UB954-Q1EVM, but I don't have a DACAR/FAKRA coaxial cable. I want to confirm what is the specification of this cable? And are willing to buy.

Thank you.

over 7 years ago

0 Steven(Shenzhen) Shi over 7 years ago

TI__Mastermind 30515 points

Eric,
you can use Dacar302 or 462 cable.

best regards,
Steven

0 Alex Khramov over 7 years ago in reply to Steven(Shenzhen) Shi

Prodigy 100 points

Hi,

Do you have an idea about connector type mated with FAKRA connectors on DS90UB953 - Q1EVM and DS90UB954-Q1EVM

BR

0 Steven(Shenzhen) Shi over 7 years ago in reply to Alex Khramov

TI__Mastermind 30515 points

Alex,
can you check it with Amphenol or Rosenberger vendor? thanks.

best regards,
Steven

0 Steven(Shenzhen) Shi over 7 years ago in reply to Alex Khramov

TI__Mastermind 30515 points

Alex,
regarding the connector in UB953 EVM board, you can get the BOM for reference as below, thanks.

DESIGNATOR QTY. VALUE DESCRIPTION PACKAGE
REFERENCE PART NUMBER MANUFACTURER
J16 1 Connector, HF, 50 Ohm, TH Rosenberger_59S1
0H-40ML5-Z
59S10H-40ML5-Z Rosenberger

best regards,
Steven

0 Alex Khramov over 7 years ago in reply to Steven(Shenzhen) Shi

Prodigy 100 points

Hi,

Thank you for to feedback but my question is not related to connector type on the PCB but to the mated part name located on the cable which has to plug in into Rosenberger_59S1
0H-40ML5-Z. Do you have an idea? I just ask because want to make a cable,

0 Steven(Shenzhen) Shi over 7 years ago in reply to Alex Khramov

TI__Mastermind 30515 points

alex,
These are standard Fakra cables here are some reference to AMP and Pasternack, I think you might find on digikey also, I am not sure.

www.google.com/url

www.google.com/url

best regards,
Steven

Interface

Interface forum

DS90UB954-Q1EVM: DS90UB954-Q1EVM