• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 508 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCA9306: Logic level for EN pin

Satoshi
Guru 19685 points

Part Number: PCA9306

I didn't find EN input threshold for High and Low level on the datasheet. 

I guess that EN High: 2.0V_min and Low: 0.8V_max, is it correct?

If not correct, please let me know correct Enable input High/Low level.

Best regards,

Satoshi

  • 0
    TI__Guru 62920 points
    Hi Satoshi-san,

    EN is actually not a logic input. It is an analog input used by the device to generate a gate bias for the internal switches. We recommend tying it to VREF2 and pulling it high via a 200-kOhm current-limiting resistor in order to operate with the device active. The EN pin could be pulled to 600 mV or lower to disable the device (make it high impedance).

    Max