• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 3462 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SN65HVD234: SN65HVD234QDRQ1

MAX3232: MAX3232CDR

Manjunath G14
Expert 2075 points

Part Number: MAX3232

Hi,

Please review the attached RS232 converter schematic and please share your valuable comments to us to improve the design.

Thanks,

Regards,

Manjunath G

Hardware design Engineer,

Crevavi Technologies  

  • 0
    TI__Mastermind 25705 points
    Manjunath,

    The schematic looks good to me. A few notes: 1) please choose the charge pump capacitor (C26, C27, C29, C30) voltage rating as high as possible, at least 10V, or even 16V; 2) in the layout please put the capacitors as close as to the pins; 3) in the layout please have solid power/ground connections to the device. Please let me know if you more questions in your application. Thanks for choosing TI parts.

    Regards,
    Hao
  • 0 in reply to Hao L
    Expert 2075 points

    Hi Hao,

    Thanks for your valuable review comments,

    Regards,

    Manjunath

    Design Engineer(R&D)