DP83TC811S-Q1: Application issue

Eric Shen42

Part Number: DP83TC811S-Q1

Dear TI:

My customer use DP83TC811S-Q1, he parallel FB612,611,610,609 in TRDP and TRDN, the Bead FB609,610,611,612 is MPZ2012S102ATD25(P/N), does the bead will affect the data transfer?

DS of MPZ2012S102ATD25:

https://product.tdk.com/info/zh/catalog/datasheets/beads_automotive_power_mpz2012_zh.pdf

There is a low power mode app note of DP83TC811S-Q1, can you give me a link?

Thanks!

over 6 years ago

0 Aniruddha Khadye over 6 years ago

TI__Mastermind 18425 points

Hi Eric,

We are checking on this internally and will get back to you by Friday, May 1.

-Regards,
Aniruddha

0 Eric Shen42 over 6 years ago in reply to Aniruddha Khadye

Expert 2750 points

Hi Aniruddha:
How about the checking?
Thanks!

0 Aniruddha Khadye over 6 years ago in reply to Eric Shen42

TI__Mastermind 18425 points

Hello Eric,

The 100Base-T1 standard does not call for the ferrite beads in that location. Since this is non-standard application, it has not been tested. Customer will have to perform their own system validation in this case.

-Regards,
Aniruddha

Interface

Interface forum

DP83TC811S-Q1: Application issue