• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 380 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB913A-Q1: Does ds90ub913 & ds90ub914 support repeater application?

Kevin Wen
Intellectual 2235 points
Part Number: DS90UB913A-Q1

Hi team,

Does ds90ub913 & ds90ub914 support repeater application like ds90ub925 & ds90ub926?

in DS90UB925/926 datasheet, it shows DS90UB925/926 support repeater application that each RX output can be connect to 3 TX inputs, can we do the same with DS90UB913/914?

Thanks.

Kevin.

 

  • 0
    TI__Mastermind 30515 points

    Kevin,

    as a thumb of rule, if the stub among UB914 parallel output to the parallel input (~70Mbps) of UB914s is short enough, it can be used for the 1:3 application. but please note the I2C can't be available for repeated UB913a/914a.

    btw, we promote DS90UB934 NOT DS90UB914a now.

    Steven