Linux/DS110DF410: software for eye

Shimon caspi

Prodigy 30 points

Part Number: DS110DF410

Tool/software: Linux

I need software for eye in part DS110DF410

over 7 years ago

0 Lee Sledjeski over 7 years ago

TI__Mastermind 43795 points

Hi Shimon,

The only GUI available for this device runs on a Windows platform.

The link is shown below.

www.ti.com/.../SIGCONARCHITECT

You can download both the GUI tool and the DS110DF410 device profile on this link.

Regards,

Lee

0 Shimon caspi over 7 years ago in reply to Lee Sledjeski

Prodigy 30 points

Hi

i use the information in Embedded.

and i need presentation the 64x64.

can you teal me what value is good.

0 Michael Lu (Santa Clara) over 7 years ago in reply to Shimon caspi

TI__Mastermind 29655 points

Hi Shimon,

Assuming that you have SMBus programming access, you can read-back the 64x64 eye diagram by following the steps on p. 29 for the procedure to read the eye diagram.

Thanks,

Michael

0 Shimon caspi over 7 years ago in reply to Michael Lu (Santa Clara)

Prodigy 30 points

Hi

Yes I have SMBus and I read 64x64 parameter.

0 -I understand.
but what is mining of the value .

0 Nasser Mohammadi over 7 years ago in reply to Shimon caspi

TI__Guru* 93570 points

Hi Shimon,

Values are indication of eye hits or eye crossing.

Since this case has been opened for some times with no activity, i am going to close this case. Please re-open another case if there is a question.

Regards,,nasser

Interface

Interface forum

Linux/DS110DF410: software for eye