DS90UB948-Q1: Demo code

Kevin Xiong

Expert 2340 points

Part Number: DS90UB948-Q1

Hi,

Our customer is using DS90UB948-Q1. He wants to get the reference code or demo code or configuration of the registers.

Could you please help provide it? TI has DS90UB948-Q1EVM. Does the demo have reference code? Thanks.

Kevin Xiong

over 7 years ago

0 Steven(Shenzhen) Shi over 7 years ago

TI__Mastermind 30515 points

Hi,
in many cases, ub948 can run with the mode-sel pins.
in some cases, you Need configure ub947/948 or touch panel, you Need set the i2c pass-through, and i2c alias, and set the gpio.
dependend on the paired ser/deser, the setting Could be different. Ti provides how to use i2c app. note, but have no refer. code for ub948.

Steven

0 Kevin Xiong over 7 years ago in reply to Steven(Shenzhen) Shi

Expert 2340 points

Hi Steven,
Could you please provide the I2C app. note?
Thanks.
Kevin Xiong

0 Steven(Shenzhen) Shi over 7 years ago in reply to Kevin Xiong

TI__Mastermind 30515 points

Kevin,
you can read UB948 d/s in page80 to get the app. note, or visit my.ti.com to get the app. note.

I2C Communication Over FPD-Link III with Bidirectional Control Channel, SNLA131

best regards,
Steven

Interface

Interface forum

DS90UB948-Q1: Demo code