SN65DP159: I2C Software

designer01

Part Number: SN65DP159

Hello... is there existing Windows 10 software where I can modify the registers via I2C on the SN65DP159? I'm troubleshooting this device on my board, and wish I had more fine-tuning access to the configure the SN65DP159. Please advise. Thanks.

over 7 years ago

0 Michael.Walker over 7 years ago

TI__Mastermind 19720 points

In our labs we use the Aardvark I2C/SPI Host Adapter to send I2C to the SN65DP159 from our computers.

0 designer01 over 7 years ago in reply to Michael.Walker

Prodigy 160 points

Nice... we have the Aardvark too. Is there a software tool available to pass commands through the Aardvark to the SN65DP159?

0 Michael.Walker over 7 years ago in reply to designer01

TI__Mastermind 19720 points

You can use the Aardvark's GUI in batch mode to program the Aardvark to send commands to the SN65DP159. I can give you some example code for the batch mode for the DP159.

Interface

Interface forum

SN65DP159: I2C Software