• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 397 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB953-Q1EVM: DS90UB953-Q1EVM and DS90UB954-Q1EVM need a standalone USB2ANY adaptor for debug?

Tiger Wang
Expert 1625 points
Part Number: DS90UB953-Q1EVM
Other Parts Discussed in Thread: USB2ANY, DS90UB954-Q1EVM, ALP

Dear Sir,

It seems both of EVMS have 430 MCU on their board,do both of DS90UB953-Q1EVM and DS90UB954-Q1EVM need a standalone USB2ANY adaptor  for debug?

David

  • 0
    TI__Expert 5480 points
    Hi David,

    You can simply use a USB2ANY adaptor for one board (usally DES) and connect to the other board using a coax cable. From the ALP, you should be able to control the deserializer from the registers tab and the serializer from the remote registers tab.

    -Sally